Black WPC privacy fence and gate at golden hour
Modular kits · Black or brown

Composite fence panels.
One bay at a time.

WPC fence panels for Los Angeles and the San Fernando Valley: 6 ft wide × 6 ft tall modular sections with aluminum top profile and all hardware included. Surface-mount posts; one extra post per added bay.

$248 per set · Gates $398 · 5 set min

Privacy that
doesn't rot.

Composite WPC fence panels stand up to rot, rust, insects, mold, and UV without needing paint or stain. The aluminum top profile adds rigidity for wind loading. Panels, 3" × 3" posts, matching gates, and hardware all come from one local supplier — a complete, one-stop fence solution.

Black WPC fence installed at a corner

Fence Kit — Black

$248/set

6 ft × 6 ft bay. Includes 9 panels, 1 aluminum post, 2 top/bottom covers, 1 base, 1 cap, 4 corner brackets, and hardware to install.

6×6 ftbay size
9panels/set
5 setsmin order
Full black kit details →
Brown WPC fence installed beside a pool

Fence Kit — Brown

$248/set

Same kit, warm brown finish. Pairs well with light or warm masonry; ages gracefully without painting or staining.

6×6 ftbay size
9panels/set
5 setsmin order
What's in each kit

Everything for
one 6×6 bay.

Each set includes 9 fence panels, 1 aluminum metal column (3" × 3" post), a metal base, top and bottom covers, a post cap, 4 corner brackets, and all the hardware. Panels slide into the channels — no special tools, surface-mount install.

  • 9 × fence panels
  • 1 × aluminum column / post (3" × 3")
  • 1 × metal base + 1 × cap
  • 2 × top / bottom covers
  • 4 × corner brackets + hardware
Diagram of WPC fence kit components: panels, column, base, covers, cap, brackets

Extra post for additional bays

Each bay beyond the first only needs one extra post — you don't need to buy a whole new kit. Surface-mount, same 3" × 3" aluminum profile as the included post.

$90each
Teak WPC privacy gate in a black powder-coated aluminum frame, shown at three-quarter view
Matching gates · in stock

A gate that matches
your fence.

$398each

A 4 ft × 6 ft gate built from the same WPC boards as the panels, set in a powder-coated aluminum frame. It ships fully assembled with the lock and hinges already fitted, so it hangs the same afternoon the run goes up.

  • 4 ft × 6 ft — arrives fully assembled
  • 1 × powder-coated aluminum frame
  • 1 × lock set with keys, pre-installed
  • Heavy-duty hinges included
  • Teak or Black wood grain finish

Mounts to wood, aluminum, or steel posts, so it drops into a WalPanel run or an existing fence. Tell us your opening width in your quote and we'll confirm the fit.

Teak WPC gate leaf with black aluminum frame and pre-fitted lock hardware
Teak, fully assembled — lock body and strike are fitted before it leaves the warehouse.
Black WPC gate leaf with aluminum frame showing wood grain texture
Black, same build. The grain is embossed through the cap, not printed on it.
Black WPC privacy gate installed and swung open between two fence bays
Black, hung and swinging between two bays.
Teak WPC gate installed in a side yard next to an older painted wood fence
Installed in a side yard
Fence calculator

How many sets
and posts?

Enter total run length in feet. Each bay is 6 ft; we'll round up and add the right number of extra posts. Add gates at $398 each — corners and slope adjustments are quoted separately.

Your estimate

Fence sets—
Extra posts—
Set cost—
Extra post cost—
Gates—
CA tax (9.75%)—
All-in total $0.00

Estimate covers straight runs plus gates. Corner posts and slope adjustments are quoted separately.

Get a project quote
Installation

Six steps.
One afternoon.

The kit is designed so installers can stand up a bay solo in about an hour. Iron base feet bolt to a flat solid surface (typically a concrete footing); aluminum post and cover slot in, panels slide in horizontally, top cap finishes the run.

Full installation guide (PDF)

Step-by-step illustrated guide with measurements, sequence, and hardware reference. Bring this to the job site.

Download PDF
01

Set the base

Bolt iron base feet to concrete or solid ground. Measure spacing per bay (6 ft on center) and use the hardware included in the kit.

02

Mount the posts

Aluminum posts and post covers slot into the iron feet in sequence. Use the corner brackets at any direction change.

03

Slide the panels

9 panels slide horizontally into the post channels. Bottom cover seats first, panels stack up, top cover finishes.

04

Cap & done

Aluminum caps press onto each post for a clean finished line. The included hardware locks panels and post covers in place.

Installation service available

Prefer not to install yourself? We offer installation by quote. We recommend visiting the showroom first so you can see and approve the product hands-on.

Request quote
Visit the warehouse

See an assembled
bay in person.

We keep an assembled section on the showroom floor. Bring your dimensions, your contractor, your design — we'll walk through your fence layout together.

Address
21350 Lassen St, Unit E17, Chatsworth, CA 91311
Hours
By appointment only
Delivery
$150–$500 within ~60 miles, quoted per job
Book a visit
21350 Lassen St, Unit E17, Chatsworth  ·  Get directions →
Good to know

Fence FAQs

How big are WalPanel fence panels?

WalPanel fence kits are modular bays measuring 6 ft wide by 6 ft tall. Each set includes the panels, an aluminum top profile, and the hardware needed to assemble the bay.

What does a WPC fence kit cost in Los Angeles?

Fence kits are $248 per 6 ft × 6 ft set — about $41 per linear foot in material — compared with $90 to $130+ per linear foot for an installed composite fence in Los Angeles. See our cost guide for the full comparison.

Do you sell a matching gate, and what does it cost?

Yes — matching WPC gates are $398 each, 4 ft wide × 6 ft tall, built from the same boards as the fence panels in a powder-coated aluminum frame. Each one arrives fully assembled with the lock set, keys, and heavy-duty hinges already fitted, in teak or black wood grain, and mounts to wood, aluminum, or steel posts. See the gate details.

Can I extend a fence later?

Yes. Add one extra post for $90 per additional bay rather than buying a whole new set, so you can extend a run economically.

Is there a minimum order for fence?

The minimum fence order is 5 sets. Request a written quote with your run length and we'll confirm the number of sets, posts, and pricing.

What colors are available, and do you deliver in Los Angeles?

Fence panels are stocked in black and brown. In-stock kits are ready for same-day or next-day pickup by appointment in Chatsworth, and local delivery is quoted within about 60 miles, covering Los Angeles, Santa Monica, the San Fernando Valley, and nearby areas.

Is a WPC fence better than Trex or wood?

WPC resists rot, insects, and warping better than wood and is stocked factory-direct, so material costs are well below typical Trex retail. See our WPC vs Trex vs wood comparison for details.

WPC fence panels across Los Angeles

We stock WPC fence panels at our Chatsworth showroom and serve homeowners and contractors throughout Los Angeles. See local pickup and delivery details for Chatsworth, Porter Ranch, Northridge, Woodland Hills, Glendale, and Burbank.