6 ft wide × 6 ft tall modular sections with aluminum top profile and all hardware included. Surface-mount posts; one extra post per added bay.
Composite WPC fence panels stand up to rot, rust, insects, mold, and UV without needing paint or stain. The aluminum top profile adds rigidity for wind loading. Panels, 3" × 3" posts, matching gates, and hardware all come from one local supplier — a complete, one-stop fence solution.
6 ft × 6 ft bay. Includes 9 panels, 1 aluminum post, 2 top/bottom covers, 1 base, 1 cap, 4 corner brackets, and hardware to install.
Same kit, warm brown finish. Pairs well with light or warm masonry; ages gracefully without painting or staining.
Each set includes 9 fence panels, 1 aluminum metal column (3" × 3" post), a metal base, top and bottom covers, a post cap, 4 corner brackets, and all the hardware. Panels slide into the channels — no special tools, surface-mount install.
Each bay beyond the first only needs one extra post — you don't need to buy a whole new kit. Surface-mount, same 3" × 3" aluminum profile as the included post.
Color-matched WPC gates built from the same boards and a black aluminum frame, so your entry blends right into the run. Panels, posts, and gates from one supplier — a true one-stop fence.
Pricing coming soon. Tell us your opening width in your quote and we'll include a matching gate.
Enter total run length in feet. Each bay is 6 ft; we'll round up and add the right number of extra posts. Matching gates (pricing coming soon) and corners are planned separately — let us know in your quote.
Estimate covers straight runs only. Gates, corner posts, and slope adjustments are quoted separately.
Get a project quoteThe kit is designed so installers can stand up a bay solo in about an hour. Iron base feet bolt to a flat solid surface (typically a concrete footing); aluminum post and cover slot in, panels slide in horizontally, top cap finishes the run.
Step-by-step illustrated guide with measurements, sequence, and hardware reference. Bring this to the job site.
Bolt iron base feet to concrete or solid ground. Measure spacing per bay (6 ft on center) and use the hardware included in the kit.
Aluminum posts and post covers slot into the iron feet in sequence. Use the corner brackets at any direction change.
9 panels slide horizontally into the post channels. Bottom cover seats first, panels stack up, top cover finishes.
Aluminum caps press onto each post for a clean finished line. The included hardware locks panels and post covers in place.
Prefer not to install yourself? We offer installation by quote. We recommend visiting the showroom first so you can see and approve the product hands-on.
We keep an assembled section on the showroom floor. Bring your dimensions, your contractor, your design — we'll walk through your fence layout together.
Book a visitWalPanel fence kits are modular bays measuring 6 ft wide by 6 ft tall. Each set includes the panels, an aluminum top profile, and the hardware needed to assemble the bay.
Fence kits are $248 per 6 ft × 6 ft set — about $41 per linear foot in material — compared with $90 to $130+ per linear foot for an installed composite fence in Los Angeles. See our cost guide for the full comparison.
Yes. Add one extra post for $90 per additional bay rather than buying a whole new set, so you can extend a run economically.
The minimum fence order is 5 sets. Request a written quote with your run length and we'll confirm the number of sets, posts, and pricing.
Fence panels are stocked in black and brown. In-stock kits are ready for same-day or next-day pickup by appointment in Chatsworth, and local delivery is quoted within about 60 miles, covering Los Angeles, Santa Monica, the San Fernando Valley, and nearby areas.
WPC resists rot, insects, and warping better than wood and is stocked factory-direct, so material costs are well below typical Trex retail. See our WPC vs Trex vs wood comparison for details.